Official 4.1 Jellybean For SGS i9070...

Hey Guys ! Here is an official Android 4.1 Jellybean  For Samsung Galaxy S Advance i9070. Follow below tutorial  carefully ...

Note :-
-This will not void your warranty , so , Don't take tention.
-It is a test firmware , May have some bugs , if you get any bugs write them down in comment box .

### Things you will need to update ###

1) Of course a PC.
2) Odin v3.09 . ( given in link below )
3) Firmware for SGS i9070( Given in Download links )
4) Mind .( i.e. some computer knowledge )

### Download links ###

Firmware for SGS i9070 :- http://go.hncvj.in/15
Odin v3.09 :- http://go.hncvj.in/f

Note :- It is highly recommended that you use UC browser on your mobile and opera on your PC to open these links properly.

### About firmware ###

PDA: I9070DXAMD1
CSC: I9070OLBAME1
Regions Supported: Austria, Belgium,
France, Germany, Hungary, Italy
United Kingdom ,India.

### Preparation before Installation ###

Note:-
-USB debugging should be turned on.
-Battery should be more than 90%

1) Download Firmware and extract it in PC.
2) Connect your phone via USB chord.
3) Wait for drivers to install.
4) After drivers installed. Remove your phone . shut down your phone and go to Download mode ( press power button + home button + volume down button simultaneously )
5) Connect your phone when you get a Yellow triangle or android logo ..
6) Flash your phone via Odin.

### How to flash firmware via Odin ###

1) Open odin Software.
2) Click on Bootloader and select the file which contains Boot word in it ...
3) Click on PDA and select the file which contains CODE word in it...
4) Click on Phone and select the file which contains MODEM word in it ...
5) Click on CSC and select the file which contains CSC word in it ..

Note :-
-There should be Check only on " AUTO REEBOOT and F. RESET TIME "  .. Other than that Check there is nothing checked ... it is matter of your phone ...
-When phone will be connected on the top left side of Odin software you will see a YELLOW or BLUE colour.
- If you perfectly not followed procedures than you can loose your phone ... so it will be better to ask doubts by messaging me ...

7) Click on START..
8) wait for SUCCESS message and Restart of your phone.

Congratulations your " SGS i9070" is now updated with ANDROID 4.1

Credits :-
-For Guide :- SuperDevs team ( Senior Member :- Vinay jain ( HnCvj ))
-For Firmware :- Sammobile

Like us on Facebook and Follow us on Twitter